 |
HAND - BUILT HOSES
Hand - Built Hose: Sand Blast / Shot Blast Hose
 |  |
Construction:
Tubes: Specially compounded abrasion resistant & resilient natural rubber (black).
Reinforcement: High tenacity synthetic yarn. Twin copper wires ensure reliable conductivity.
Covers: Specially compounded abrasion resistant natural rubber (black).
Application:
Recommended for sand, shot blasting application and where abrasive materials are carried at high velocity. Electrical conductivity: having two numbers braided copper flex wires laid spirally in opposite direction for electrical conductivity.
(-) 40 deg C to (+) 70 deg C
SERP ref # |
Hose ID (inch) |
Hose ID (mm) |
Mean OD (mm) |
Max. WP |
Min. BP |
M-SBH-12 | 3/4" | 20.00 | 38.60 | 7-100 | 35-500 |
| M-SBH-16 | 1" | 25.40 | 45.10 | 7-100 | 35-500 |
| M-SBH-20 | 1 1/4" | 31.80 | 52.70 | 7-100 | 35-500 |
| M-SBH-24 | 1 1/2" | 38.00 | 58.50 | 7-100 | 35-500 |
| M-SBH-32 | 2" | 50.80 | 71.80 | 7-100 | 35-500 |
Hand-Built Hose: Sand Blast Hose
| |
Construction:
Tube: Excellent abrasion resistant, Anti-static, modified NR, Black, Reinforcement: High tenacity synthetic yarn.
3/4" & 1":Single yarn braid
1 1/4" & 1 1/2": Double yarn braid of high tenacity synthetic yarn,
Cover: Excellent abrasion resistant, modified NR, Black
Application :
Highly abrasive material used in sand blasting applications including river sand, garnets, copper slag, coal patricides, corudum,cast steel, rift, glass, etc. Specially designed for superior performance - longer life due to very low tube wear.
Temperature Range:
(-) 40 deg C to (+) 75 deg C
SERP ref # |
Hose ID (inch) |
Hose ID (mm) |
Mean OD (mm) |
Max. WP |
Min. BP |
| M-SB-12 | 3/4" | 20.00 | 33.20 | 12-171 | 48-685 |
| M-SB-16 | 1" | 25.40 | 39.20 | 12-171 | 48-685 |
| M-SB-20 | 1 1/4" | 31.80 | 48.20 | 12-171 | 48-685 |
| M-SB-24 | 1 1/2" | 38.00 | 56.20 | 12-171 | 48-685 |
Hand-Built Hoses: Coke Injection Hose
 |  |
Application:
For conveying crushed coal to furnace. Ideal for discharge. Used in steel industry.
Features:
Extra thick seamless tube of Natural/Synthetic rubber compound of high tensile strength, excellent abrasion resistant and free from any mineral filler. Reinforced with rubberized woven textiles/synthetic cord, braided yarn. Covered with Smooth, Cloth-marked finish natural rubber compound resistant to weather and abrasion.
| SERP ref # | Hose ID (inch) | Hose ID mm | Mean OD(mm) | Max. WP (Bar- Psi) |
Mini. BP (Bar- Psi) |
| M-CIH-24 | 1 1/2" | 38.00 | 61.00 | 7-100 | 28-400 |
| M-CIH-32 | 2" | 50.80 | 75.00 | 7-100 | 28-400 |
Hand-Built Hoses : Furnace Coolant Hose
 |  |
Application:
Designed for use as a coolant hose in melting furnaces at steel mills and other high temperature environments.
Features :
Special Mino flex rubber tube is used to with stand 100 deg C hot water. Vulcanized asbestos cover with stands splashes of molten steel and radiated heat up to 400 deg C.
| SERP ref # | Hose ID (inch) | Hose ID (mm) | Mean OD mm | Max. WP (Bar-Psi) | Min. BP (Bar-Psi) |
| M-FCH-8 | 1/2" | 12.70 | 24.30 | 10-142 | 32-457 |
| M-FCH-12 | 3/4" | 20.00 | 33.00 | 10-142 | 32-457 |
| M-FCH-16 | 1" | 25.40 | 38.00 | 10-142 | 32-457 |
| M-FCH-20 | 1 1/4" | 31.80 | 49.60 | 10-142 | 32-457 |
| M-FCH-24 | 1 1/2" | 38.00 | 55.80 | 10-142 | 32-457 |
| M-FCH-28 | 1 3/4" | 45.00 | 62.50 | 10-142 | 32-457 |
| M-FCH-32 | 2" | 50.80 | 68.00 | 10-142 | 32-457 |
| M-FCH-36 | 2 1/4" | 57.00 | 74.50 | 10-142 | 32-457 |
| M-FCH-40 | 2 1/2" | 63.50 | 81.20 | 10-142 | 32-457 |
| M-FCH-48 | 3" | 76.00 | 94.50 | 10-142 | 32-457 |
| M-FCH-56 | 3 1/2" | 89.00 | 107.80 | 10-142 | 32-457 |
 |
Back |  |